H3C交换机配置链路聚合

H3C交换机配置链路聚合如何?要如何弄H3C交换机配置链路聚合.下面是小编收集整理的H3C交换机配置链路聚合，希望对大家有帮助~~

H3C交换机配置链路聚合

创建聚合组1(根据具体情况选择下面两种方式之一)。

l采用静态聚合模式：创建二层聚合接口1

system-view

[SwitchA] interface bridge-aggregation 1

[SwitchA-Bridge-Aggregation1] quit

l采用动态聚合模式：创建二层聚合接口，并配置动态聚合模式

system-view

[SwitchA] interface bridge-aggregation 1

[SwitchA-Bridge-Aggregation1] link-aggregation mode dynamic

# 将以太网端口GigabitEthernet1/0/1至GigabitEthernet1/0/3加入聚合组1。

[SwitchA] interface GigabitEthernet 1/0/1

[SwitchA-GigabitEthernet1/0/1] port link-aggregation group 1

[SwitchA-GigabitEthernet1/0/1] interface GigabitEthernet 1/0/2

[SwitchA-GigabitEthernet1/0/2] port link-aggregation group 1

[SwitchA-GigabitEthernet1/0/2] interface GigabitEthernet 1/0/3

[SwitchA-GigabitEthernet1/0/3] port link-aggregation group 1

[SwitchA-GigabitEthernet1/0/3] quit

# 配置二层聚合接口1所属VLAN，并将该配置批量下发到各成员端口上。

[SwitchA] interface bridge-aggregation 1

[SwitchA-Bridge-Aggregation1] port access vlan 20

[SwitchA-Bridge-Aggregation1] quit

# 显示配置信息。

l采用静态聚合模式的链路聚合配置信息

[SwitchA] display link-aggregation verbose

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregation Interface: Bridge-Aggregation1

Aggregation Mode: Static

Loadsharing Type: Shar

Port Status Oper-Key

--------------------------------------------------------------------------------

GE1/0/1 S 1

GE1/0/2 S 1

GE1/0/3 S 1

结果说明：本端加入到静态聚合组内的成员端口都处于Selected状态，与对端对应端口是否是Selected状态无关。

l采用动态聚合模式的链路聚合配置信息

[SwitchA]display link-aggregation verbose

Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing

Port Status: S -- Selected, U -- Unselected

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

Aggregation Interface: Bridge-Aggregation1

Aggregation Mode: Dynamic

Loadsharing Type: Shar

System ID: 0x8000, 000f-e234-5678

Local:

Port Status Priority Oper-Key Flag

--------------------------------------------------------------------------------

GE1/0/1 S 32768 1 {ACDEF}

GE1/0/2 S 32768 1 {ACDEF}

GE1/0/3 S 32768 1 {ACDEF}

Remote:

Actor Partner Priority Oper-Key SystemID Flag

--------------------------------------------------------------------------------

GE1/0/1 17 32768 1 0x8000, 0000-fc00-6504 {ACDEF}

GE1/0/2 18 32768 1 0x8000, 0000-fc00-6504 {ACDEF}

GE1/0/3 19 32768 1 0x8000, 0000-fc00-6504 {ACDEF